OUR IRON FILTERS
Specifications:
- All the filter media you need for the system is included.
- Birm and/or Greensand iron filters are an excellent method of removing high levels of iron manganese and odor from well waters.
- Iron and manganese are oxidized and precipitated instantly by contact with the greensand media.
- The system automatically backwashes and cleans the greensand filter media using potassium permanganate which is easily added on a regular basis to the potassium permanganate solution tank.
- Raw water pH should be 6.8 or greater for best performance although it will work down to a pH of 6.5.
- Chlorine can be fed through the iron filter to increase performance.
- Filter tank is NSF certified one piece seamless polyester construction for long life.
- Max pressure recommended is 100 psi.
- Maximum water temperature recommended 100F.
- Rugged heavy-duty Fleck 2510 backwash control valve features fully adjustable backwash and rinse cycles saving water and allowing maximized performance.
- Time-tested hydraulically balanced piston seal and spacers provide years of trouble-free service.
- Non-corrosive high-tech material construction.
- 12-day time clock can be programmed so the filter backwashes at any time of the day at intervals of every 1, 2, 3, 4, 6 or 12 days.
- The recommended maximum flow rate for best filtration performance is 5.0 gallons per minute but peak flow rates of up to 10 gallons per minute are possible.
- The backwash flow rate is 5.0 gallons per minute.
- If your water has both iron and manganese, or iron and hydrogen sulfide odor, or iron bacteria, this is a very effective and heavy-duty approach to achieve clean odor-free water through out the house!
Common Tank Sizes:
- 9' diameter x 48" height
- 10" diameter x 44" height
- 10" diameter x 54" height
- 12" diameter x 52" height
- 13" diameter x 54" height
WARRANTY:
- 10 years on tank
- 5 years on valve body
- 1 year all other parts and labor
